51 42 017 Removing and installing/replacing cover on door handle (inside), rear left or right

Special tools required: 

• 64 1 020

When working on trim panel components, make sure that visible surfaces are not scratched or damaged (e.g. by sharp-edged tools).

Lever out cover (1) on the door handle with special tool 64 1 020 and remove.

Fig 1: Pulling Out Cover On Door Handle With Special Tool (64 1 020)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Retaining clips (2) must not be missing or damaged.

Fig 2: Identifying Retaining Clips And Screws

Courtesy of BMW OF NORTH AMERICA, INC.