51 41 017 Removing and installing/replacing cover on door handle (inside), front left or right

Special tools required:

When working on trim panel components, make sure that visible surfaces are not scratched or damaged (e.g. by sharp-edged tools).

Lever out cover (1) on the door handle with special tool 64 1 020 and remove.

Fig 1: Removing Door Handle Cover Using Special Tool 0 493 681 (64 1 020)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Retaining clips (2) must not be missing or damaged.

Fig 2: Identifying Door Trim Panel Retaining Clips

Courtesy of BMW OF NORTH AMERICA, INC.