65 77 720 Removing and installing/replacing left/right B-pillar sensor

WARNING: Comply with AIRBAG SAFETY REGULATIONS .
Incorrect handling can lead to airbag deployment and cause injury.

Necessary preliminary work:

Slacken bolt (1).

Release screw (2).

Tightening torque 65 77 3AZ .

Feed out sensor (3).

Fig 1: Identifying Sensor, Bolt And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten plug connection (1) and disconnect.

Remove sensor (2).

Fig 2: Identifying Sensor And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.