51 22 280 Removing and installing/replacing door stop on left or right rear door
Necessary preliminary work:
- Remove SOUND INSULATION in the area of the door stop
- Completely close side window if necessary
IMPORTANT:
After disengaging door stop, use suitable means of preventing door from opening past its maximum permissible opening angle (risk of damaging paintwork or bodywork).
Release screw (3).
Tightening torque 51 22 4AZ .
Unscrew nuts (1).
Tightening torque 51 22 5AZ .
Feed out door stop (1) via door cut-out and place to one side.