51 21 280 Removing and installing/replacing door stop on left or right front door
Necessary preliminary work:
- Remove SOUND INSULATION in the area of the door stop
- Completely close side window if necessary
IMPORTANT:
After disengaging door stop, use suitable means of preventing door from opening past its maximum permissible opening angle (risk of damaging paintwork or bodywork).
Release screw (3).
Tightening torque 51 21 6AZ .
Unscrew nuts (1).
Tightening torque 51 21 7AZ .
Feed out door stop (1) via door aperture and set down.