33 17 Rear axle final drive suspension
TIGHTENING TORQUE SPECIFICATIONS - REAR AXLE FINAL DRIVE SUSPENSION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Rear axle final drive to rear axle support | R60/R61 | M12 | 100 Nm | |
| 2AZ Rear axle final drive to cross member | R60/R61 | M10 | Replace screws. Jointing torque and angle of rotation must be observed without fail. Jointing torque Angle of rotation |
56 Nm 90 ° |