54 13 052 Replacing seal on front glass slide/tilt sunroof cover

WARNING: This page is about a different car, the 2016 MINI Cooper Paceman, 2015 MINI Cooper Paceman, 2014 MINI Cooper Paceman, and 2013 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary work:

Move front glass slide/tilt sunroof cover to vent position

NOTE: Follow REPAIR INSTRUCTIONS for bonded sealing on glass slide/tilt sunroof.

Pull seal off glass slide/tilt sunroof cover.

Installation note:

Clean bonding surface with adhesive remover
Press seal without stretching (squashing)
Stick on seal in sections

Fig 1: Identifying Seal On Front Glass Lid

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Do not touch adhesive area.
Surface temperature ≥20 °C
Incorrect bonding of the sealing will result in leaks.