24 21 230 Removing radial shaft seal of right axle shaft (AISIN)

WARNING: This page is about a different car, the 2016 MINI Cooper Paceman, 2015 MINI Cooper Paceman, 2014 MINI Cooper Paceman, and 2013 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

23 0 490
24 4 300

Necessary preliminary tasks:

Remove TRANSMISSION

Drive a hole into radial shaft seal using a center punch.

IMPORTANT: Do not use a drill as drillings may result in transmission malfunction.

Screw special tool 23 0 490 into radial shaft seal.

Drive out radial shaft seal (1) with impact weight (2).

Fig 1: Removing Radial Shaft Seal

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Coat sealing lips of new radial shaft seal with clean transmission oil.

Drive shaft seal (1) firmly home with special tool 24 4 300.

Fig 2: Installing Radial Shaft Seal

Courtesy of BMW OF NORTH AMERICA, INC.