34 33 071 Replacing vacuum hose for brake booster (N18)
WARNING: This page is about a different car, the 2016 MINI Cooper Paceman, 2015 MINI Cooper Paceman, 2014 MINI Cooper Paceman, and 2013 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary work:
Before beginning repair work, fully press the brake pedal several times to reduce the vacuum pressure in the brake servo. This makes it easier to detach the vacuum hose.
Unclip vacuum line out of bracket (1).
Disconnect snap fasteners (2) and remove vacuum line.
Installation note:
Snap fasteners must be felt and heard snapping into place.