63 25 000 Removing and installing/replacing additional brake light

Necessary preliminary tasks:

On R60:

If necessary, disconnect plug connection (1).

Unfasten screws (2).

Tightening torque 63 25 1AZ .

Remove the additional brake light (3) from the trim panel for the rear window frame at top.

Installation note:

Make sure the additional brake light (3) on the trim panel for the rear window frame is correctly fitted at top

Fig 1: Identifying Additional Brake Light, Plug Connection And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

On R61:

Release screws (1).

Tightening torque 63 25 1AZ .

Remove the additional brake light (2) from the trim panel (3).

Installation note:

Make sure the additional brake light (2) is correctly fitted on the trim panel (3)

Fig 2: Identifying Additional Brake Light, Trim Panel And Screws

Courtesy of BMW OF NORTH AMERICA, INC.