41 62 014 Adjusting Rear Lid
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.
The 41 00... BODY GAP DIMENSIONS . serve as the basis for adjustment work.
Make unpainted surfaces visible by also moving the hinges.
Touch these up in the appropriate color.
Release screws (1) on rear lid hinge to rear lid so that rear lid can still be moved.
Adjust rear lid.
Tighten bolts.
Tightening torque 41 62 1AZ .
Adjusting height of rear lid in relation to side panel:
- Remove TENSION SPRING
- Remove cap from opening (1)
NOTE:
Parcel shelf is shown removed for purposes of clarity.
Slacken nut (1) with a suitable tool (13 mm A/F) until hinge (2) can be moved.
Adjust height of rear lid.
Adjust REAR LID LOCK .
Tighten nut.
Tightening torque 41 62 4AZ .