34 41 001 Removing and installing handbrake lever

Necessary preliminary tasks:

After completing tasks, ADJUST HANDBRAKE .

Release adjustment unit (1) for handbrake lever.

Fig 1: Identifying Adjusting Fixture For Parking Brake Bowden Cable

Courtesy of BMW OF NORTH AMERICA, INC.

Detach both parking brake Bowden cables from balance arm.

Fig 2: Detaching Both Parking Brake Bowden Cables From Balance Arm

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection for handbrake check switch.

Release screws (1) and remove fastener (2).

Installation:

Tightening torque 34 41 1AZ .

Remove handbrake lever.

Fig 3: Identifying Screws And Fastener

Courtesy of BMW OF NORTH AMERICA, INC.