22 31 050 Replacing cross-member for transmission mounting (N63)
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary work:
- Remove rear underbody protection. See 51 47 491 REMOVING REFITTING/REPLACING REAR ENGINE UNDERCOVER .
Support transmission with hydraulic jack.
Release screws (1).
Tightening torque: 22 32 3AZ .
Unscrew nuts (2).
Tightening torque: 22 32 4AZ .
Remove cross member.