41 62 014 Adjusting Rear Lid

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

Read contents of BODY, GENERAL .

The E60 gap dimensions serve as the basis for adjustment work.

Make unpainted surfaces visible by also moving the hinges. Touch these up in the appropriate color.

Release screws (1) on rear lid hinge to rear lid so that rear lid can still be moved.

Adjust rear lid.

Tighten bolts.

Tightening torque 41 62 1AZ .

Fig 1: Identifying Rear Lid Hinge Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Adjusting height of rear lid in relation to side panel:

Remove tension spring
Remove cap from opening (1)

Fig 2: Removing Cap From Opening
Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Parcel shelf is shown removed for purposes of clarity.

Slacken nut (1) with a suitable tool (13 mm A/F) until hinge (2) can be moved.

Adjust height of rear lid.

Adjust rear lid lock .

Tighten nut.

Tightening torque 41 62 4AZ .

Fig 3: Adjusting Height Of Rear Lid

Courtesy of BMW OF NORTH AMERICA, INC.