11 23 010 Removing and installing or replacing vibration damper (N18)

Necessary preliminary tasks: 

• Remove right WHEEL ARCH COVER
• Remove drive belt. See 11 28 010 REPLACING DRIVE BELT FOR ALTERNATOR (N18)  or 11 28 012 REPLACING DRIVE BELT (WITHOUT HEATING AND AIR CONDITIONING SYSTEM) .

Release screws (1).

Tightening torque: 11 23 1AZ .

Remove vibration damper.

Fig 1: Identifying Vibration Damper Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.