00 2 480 Measurement Stand With Clamp

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 MINI Cooper, 2007 MINI Cooper, 2006 MINI Cooper, 2005 MINI Cooper, and 2004 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Engine: M10, M20, M20B25, M20B27, M21, M30, M30B34, M30Tur, M40, M41, M42, M43, M43TU, M44, M47, M47TU, M50, M51, M52, M52TU, M54, M56, M57, M57D25, M57D30, M57TU, M60, M62, M62VAN, M67, M70, M73, M88, N40, N42, N62, N73, S14, S38, S50B30, S50B32, S50US, S52US, S54, S62, W10, W11, W17.

SI number: 1 18 99(489).

Order number: 00 2 480 .

Fig 1: Identifying 00 2 480 Measurement Stand With Clamp

Courtesy of BMW OF NORTH AMERICA, INC.

Measurement stand with clamp.

Consisting of:

= 00 2 481 Clamping foot.
= 00 2 482 Clamping piece.
= 00 2 483 Shaft.
= 00 2 484 Shaft.