51 16 210 Removing and installing / replacing finisher for preselector lever

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 MINI Cooper, 2007 MINI Cooper, 2006 MINI Cooper, 2005 MINI Cooper, and 2004 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Remove selector handle. Refer to SHIFT LEVER HANDLE .

Pull dust cover surround (1) upwards to release six securing clips.

NOTE: Dust cover surround has locating pins that ensure correct fitment into the center console.

Disconnect PRND display connector (2).

Fig 1: Disconnecting PRND Display Connector

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement only:

Release clips (1) and remove dust cover assembly (2) from dust cover surround.

Release clips (3) and remove PRND display assembly (4) from dust cover.

Fig 2: Removing PRND Display Assembly From Dust Cover

Courtesy of BMW OF NORTH AMERICA, INC.