25 16 065 Replacing gaiter (selector lever cover) for gearshift bracket

Necessary preliminary work:

Detach trim cover (1) in upward direction.

Fig 1: Detaching Trim Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Use suitable tool to release gaiter retainers (1).

Pull off gaiter upwards.

Fig 2: Releasing Gaiter Retainers Using Suitable Tool

Courtesy of BMW OF NORTH AMERICA, INC.

Release plug connection (1) on holder and disconnect.

Remove gaiter (2).

Fig 3: Identifying Gaiter And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Release retainers and remove trim cover (1).

Fig 4: Removing Trim Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Remove cover (1) in direction of arrow and feed out wiring harness (2) with display.

Fig 5: Removing Cover

Courtesy of BMW OF NORTH AMERICA, INC.