51 16 366 Removing and installing right glove box with housing

Necessary preliminary tasks: 

• Remove LOWER INSTRUMENT PANEL TRIM 

Open glove box cover if necessary.

Release screws (1).

Fig 1: Identifying Glove Box Cover Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Lever out glove box light (1).

Disconnect plug connection (2).

Fig 2: Identifying Glove Box Light And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten screws (2).

Pull out glove box at right with housing (1) and set it down.

Fig 3: Identifying Glove Box Housing And Screws

Courtesy of BMW OF NORTH AMERICA, INC.