51 31 045 Removing and installing/replacing trim cover on A-pillar (outer), left or right

Necessary preliminary work:

NOTE: Illustrations originate from R56.

Release screws (1).

Release trim (2) at clips (3) and remove.

Installation note:

If necessary, replace faulty clips (3).

Fig 1: Identifying Trim, Clips And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

If necessary, replace faulty nut inserts (1) on A-pillar (2).

Fig 2: Identifying Nut Inserts On A-Pillar

Courtesy of BMW OF NORTH AMERICA, INC.