63 31... Replacing LED for side trim panel light (left or right)

Necessary preliminary tasks:

NOTE: Similar to graphic.

Unlock associated plug connection and disconnect.

Release LED for side trim panel light (1) from brackets (2) on side trim panel (3).

Carefully lift LED for side trim panel light (1) out of the side trim panel (3).

Fig 1: Releasing LED For Door Trim Panel Lighting From Bracket

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Similar to graphic.

Carefully pull off LED for side trim panel light (1) from fibre-optic conductor (2).

Installation note:

LED for side trim panel light (1) must be felt to snap into place in fibre optic conductor (2).

Fibre-optic conductor (2) must not be damaged.

Fig 2: Disconnecting LED For Door Trim Panel Lighting From Fiber Optic Conductor

Courtesy of BMW OF NORTH AMERICA, INC.

LED for side trim panel light (1) must be felt to snap into place in brackets on the side trim panel (3).