63 14 120 Removing and installing or replacing rear reflector

Necessary preliminary tasks: 

• Remove REAR BUMPER TRIM

Disengage the rear reflector (1) on the latch mechanism (2) and feed it out from the bumper panel (3).

Fig 1: Identifying Rear Reflector Latch Mechanisms And Bumper Panel

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

The retaining lugs (1) and guide (2) on the rear reflector (3) must not be damaged or missing.

Make sure rear reflector (3) is correctly seated.

Fig 2: Identifying Rear Reflector Retaining Lugs And Guide

Courtesy of BMW OF NORTH AMERICA, INC.