51 13 Trim Parts, Covers, Handle Strip
TIGHTENING TORQUE SPECIFICATION - TRIM PARTS, COVERS AND HANDLE STRIP
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Trim strip to gutter strip | F33 | Oval-head self-tapping screw | 1.8 Nm | |
| 2AZ A-pillar node on the cowl panel | F33 | M5x16 | 3.3 Nm |
TIGHTENING TORQUE SPECIFICATION - TRIM PARTS, COVERS AND HANDLE STRIP
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Roof trim strip to roof | R50/R53/R55/R56 | 1.5 Nm | ||
| 2AZ Retaining clip of roof trim strip to roof | R50/R53 | 1.5 Nm | ||
| 3AZ Spoiler to tailgate | R50/R53 | M6 | 8.5 Nm | |
| 4AZ Outer C-pillar trim to body | R55 | M6 x 13 | 4.0 Nm | |
| 5AZ Roof rails to roof | R55/R60/R61 | M6 | 9 Nm | |
| 6AZ Front grille to front panel. | R60/R61 | 3.5 Nm |