000490 Holder

In conjunction with: 00 6 100

NOTE: (Holder (2 x)) For adapting engine bracket 00 0 200 to vehicle. Replaced by 00 6 150 .

SI number:

01 23 06 (308)

Fig 1: Identifying Holder (000490)

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

1 = 0495911 Basic body

NOTE: Not available individually, but as part of complete set 00 0 490 = 0495904.

2 = 0495912 Pipe

NOTE: (Profile tube) Liquidation of existing inventory and deletion, then no longer available individually but only via complete set 00 0 490 = 0495904.

3 = 0495913 Holder

NOTE: Not available individually, but as part of complete set 00 0 490 = 0495904.

4 = 0495914 Nut

NOTE: (Knurled nut (2 pieces)) Liquidation of existing inventory and deletion, then no longer available individually but only via complete set 00 0 490 = 0495904.