51 23 265 Removing and installing/replacing left or right gas pressure support fro engine hood/bonnet
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 MINI Cooper, 2007 MINI Cooper, 2006 MINI Cooper, 2005 MINI Cooper, and 2004 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
Open hood/bonnet.
WARNING:
Support engine hood/bonnet in fully opened position with suitable apparatus. Risk of injury.
Make a written record of the alignment of the gas pressure support(s) before removing.
Slide retaining spring (1) downwards and disengage gas pressure support (2) from bracket on body side.
Slide retaining spring (1) upwards and disengage gas pressure support (2) from bracket on hood/bonnet side.