Gaskets and loose body parts
WARNING: This page is about a different car, the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUES SPECIFICATIONS - GASKETS AND LOOSE BODY PARTS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Wheel arch cover to body | F54/F55/F56/F57/F60 | 3 Nm | ||
| 2AZ Lashing point to body | F54/F55/F56 | 19 Nm | ||
| 3AZ Rear spoiler to trunk lid (middle) | F55/F56 | 3 Nm | ||
| 4AZ Rear spoiler to trunk lid (outer) | F55/F56 | 2 Nm | ||
| 5AZ Underbody protection | F54/F55/F56/F57/F60/F45/F46/F48/F49/F52 | 3 Nm | ||
| F52 | M6 | 8 Nm | ||
| 6AZ Air flap control to support | F54/F55/F56 | 6 Nm | ||
| 7AZ Rear spoiler to body | F54 | 3 Nm | ||
| 8AZ Lower part of rear spoiler to body | F54 | 7.6 Nm | ||
| 9AZ Bulkhead cover | F54/F48/F49/F60 | 3 Nm | ||
| 10AZ Mounting from hood seal, sideways | F48/F49/F60 | 3 Nm | ||
| 11AZ Vehicle underbody cover at side | F52/F57 | Hexagon screw | 3 Nm | |
| Plastic nut | 2.6 Nm | |||
| 12AZ Front cowl panel seal on cowl panel | F57 | 3 Nm | ||
| 13AZ Base plate to body | F60 | 8 Nm |