51 71 447 Removing and installing/replacing trim for cover on left or right frame side member

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 MINI Cooper, 2007 MINI Cooper, 2006 MINI Cooper, 2005 MINI Cooper, and 2004 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Necessary Preliminary Tasks:

R52 only:

Remove outer tension strut.

Remove and dispose of insert (1) for door sill cover.

Installation:

Adhesive residues must be removed from door sill cover prior to fitting.

Fig 1: Removing Of Insert For Door Sill Cover

G03306851

Courtesy of BMW OF NORTH AMERICA, INC.

Remove and dispose of clips (1) for door sill cover.

Fig 2: Locating For Door Sill Cover

G03306852

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1).

Release threaded blind rivet (2).

Release clips for door sill cover and remove from body.

Fig 3: View Of Threaded Blind Rivet

G03306853

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Make sure damaged clips (1 and 2) are replaced prior to fitting.

Fig 4: Identifying Damaged Clips

G03306854

Courtesy of BMW OF NORTH AMERICA, INC.