LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2014 >> Cooper Base, 2D Coupe, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1703 (COLLISION - BODY PANEL REPAIR (E65) Alpina) >> Rear Lid >> 41 62 014 Adjusting Rear Lid

41 62 014 Adjusting Rear Lid

WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Gap dimensions E65/E66  serve as basis for adjustment work.
Moving the hinges later on makes unpainted surfaces visible. Touch these up in the appropriate color.

Slacken nuts (1) on rear lid hinge to rear lid so that rear lid can still be moved.

Adjust rear lid.

Adjust rear lid lock.

Tighten nuts (1) again.

Fig 1: Identifying Trunk Lid Nuts
G04779140Courtesy of BMW OF NORTH AMERICA, INC.