Removal & Installation
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 MINI Cooper, 2007 MINI Cooper, 2006 MINI Cooper, 2005 MINI Cooper, and 2004 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
Draw hydraulic fluid out of tank. Do not reuse. Release nuts (1). Release nut (2) and remove fastening clamp from supply reservoir. Open hose clips (3) and detach hoses from supply reservoir. During installation, replace hose clamps. Bleed power steering system. See BLEEDING .