51 45 380 Removing and installing (replacing) right decorative strip on instrument panel

WARNING: This page is about a different variant/trim than selected.

Special tools required:

Carefully unclip decorative strip (1) with special tool 00 9 317 at retaining points (2) and remove.

Fig 1: Unclipping Decorative Strip With Special Tool (00 9 317) At Retaining Points

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Make sure pins (1) are correctly seated on decorative strip.

If necessary, replace faulty retainers (2).

Fig 2: Identifying Retainers And Pins

Courtesy of BMW OF NORTH AMERICA, INC.

Version with CD changer:

Open CD changer trim.

Release screws (1).

Tightening torque 51 45 05AZ .

Fig 3: Opening CD Changer Trim

Courtesy of BMW OF NORTH AMERICA, INC.