LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2014 >> Cooper Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 3036 (COLLISION - BODY PANEL REPAIR (E90) 328i, 328xi, 335i, 335xi) >> 4111 Support Members >> 4114502 Replacing Rear Left Outer Wheel Arch Section (Rear Left Side Panel Removed) >> Preparation Of New Part

Preparation Of New Part

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 335xi, 2010 BMW 335i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Mark new part in accordance with severance cut on vehicle + 20 mm extra material and cut (1).

Slide new part under weld spot flange in area (3).

Plug weld in areas (2) and (3).

Fig 1: Identifying Welding And Cutting Areas
G04726829Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals