LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2014 >> Cooper Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 3036 (COLLISION - BODY PANEL REPAIR (E90) 328i, 328xi, 335i, 335xi) >> 4111 Support Members >> 4111028 Replacing Left Engine Support (Partial Replacement Before Front Axle) >> Removing Carrier Support

Removing Carrier Support

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 335xi, 2010 BMW 335i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Mark severance cut (1) in accordance with measurement a and cut.

Measurement a=125 mm

IMPORTANT: Clean engine support - measured min. 50 mm from cutting edge - thoroughly with cavity sealing wax remover.
Fig 1: Identifying Severance Cut
G04726806Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals