Setting Blind Rivet Nuts And Blind Rivet Bolts

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 335xi, 2010 BMW 335i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Drill holes (0.2 mm larger than the outside diameter of the blind rivet nuts or blind rivet bolts).
Blind rivet nuts and bolts must have a special coating for corrosion reasons.
See Aftersales Assistance Portal (ASAP) - Service/Technical - Workshop Equipment (Start BMW) - Shop Workshop Equipment or at www.bmwgroup-wep.com

Use the blind rivet nuts and bolts supplied in the case of the manual riveting tool for steel only!
Insert blind rivet nuts or bolts and tighten down with the riveting tool.