4100... Information On Metal Filler: Processing
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 335xi, 2010 BMW 335i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
The working temperature of the metal filler must be at least 18°C.
A = Metal filler
B = Hardener
NOTE:
The mixture ratio refers to the volume.
Mix metal filler in mixture ratio of 5:2. Mix components thoroughly and free of pores.
IMPORTANT:
Do not stir components. Danger of air pockets in metal filler!
Working life of the metal filler is approx. 45 minutes.