61 71 061 Replacing washer fluid reservoir for windscreen washer system

Necessary preliminary tasks:

Remove expanding rivet (1) from fluid reservoir (2).

Fig 1: Identifying Expanding Rivet And Fluid Reservoir

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Remove retaining clip (2) from fluid reservoir.

Release screws (3).

Fig 2: Identifying Plug Connection, Retaining Clip, And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Remove LEVEL SWITCH for windscreen washer system.

Lift out fluid reservoir from opening (2) using a suitable tool.

Thread out fluid reservoir.

Fig 3: Identifying Guide And Opening

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Guide (1) must be correctly seated in opening (2).

Ensure hose pipes and wiring harness are laid without kinks.

Fill fluid reservoir.