00 00 M8 and M8 x 1 - maximum tightening torques acc. to BMW GS 90003-2
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 MINI Cooper, 2007 MINI Cooper, 2006 MINI Cooper, 2005 MINI Cooper, and 2004 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
M8 AND M8 X 1 - TIGHTENING TORQUES - COOPER (1.6L) R50/W10
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| Scope of applicability of tightening torques, refer to EXCERPT FROM COMPANY STANDARD BMW GS 90003-2 Surface colour / | (surface coating) | |||
| M8 thread | yellow (ZN) | M8 8.8 | 24 Nm | |
| silver (ZNS) | M8 8.8 | 19 Nm | ||
| yellow (ZN) | M8 10.9 | 34 Nm | ||
| silver (ZNS) | M8 10.9 | 28 Nm | ||
| yellow (ZN) | M8 12.9 | 40 Nm | ||
| silver (ZNS) | M8 12.9 | 32 Nm | ||
| M8x1 thread | yellow (ZN) | M8 x 1 8.8 | 26 Nm | |
| silver (ZNS) | M8 x 1 8.8 | 21 Nm | ||
| yellow (ZN) | M8 x 1 10.9 | 36 Nm | ||
| silver (ZNS) | M8 x 1 10.9 | 30 Nm | ||
| yellow (ZN) | M8 x 1 12.9 | 44 Nm | ||
| silver (ZNS) | M8 x 1 12.9 | 33 Nm |