34 11 Front Brake
TIGHTENING TORQUE SPECIFICATIONS - FRONT BRAKE
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Brake disc to wheel hub (contact faces between brake disc and wheel hub clean and grease-free) | R55/R56/R57/R58/R59 | Torx screw M10 x 13 | Replace screws | 27 Nm |
| R60/R61 | Hexagon socket screw M8x14 | Replace screws | 16 Nm | |
| 2AZ Brake caliper to steering knuckle | R55/R56/R57/R58/R59/R60/R61 | M12 | Replace self-locking or microencapsulated screws | 110 Nm |
| R56 GP II | M12 | Replace screws. The new microencapsulated screws must tightened to the prescribed tightening torque within 5 minutes of being screwed in. Jointing torque Angle of rotation |
50 Nm 90 ° |
|
| 3AZ Guide screws (hexagon screw) | R55/R56/R57/R58/R59/R60/R61 | WAF 13 | Replace self-locking or microencapsulated screws | 35 Nm |
| 4AZ Protective plate to steering knuckle | R55/R56/R57/R58/R59 | M6 x 10 | Replace self-locking or microencapsulated screws | 8 Nm |
| R60/R61 | M6 x 12 | Replace self-locking or microencapsulated screws | 12 Nm |