41 00... Riveting Steel Parts

WARNING: This page is about a different car, the 2010 BMW 550i, 2009 BMW 550i, and 2008 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

1.0 Recommended tools and equipment
- Manual riveting tool for blind rivet nuts and bolts.
2.0 Setting blind rivet nuts and blind rivet bolts:
- Drill holes (0.2 mm larger than the outside diameter of the blind rivet nuts or blind rivet bolts).
- Blind rivet nuts and bolts must have a special coating for corrosion reasons.
  Use the blind rivet nuts and bolts supplied in the case of the manual riveting tool for steel only!
- Insert blind rivet nuts or bolts and tighten down with the riveting tool.