00 00 M12 and M12x1.5 - maximum tightening torques acc. to BMW GS 90003-2
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 MINI Cooper, 2007 MINI Cooper, 2006 MINI Cooper, 2005 MINI Cooper, and 2004 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
M12 AND M12X1.5 - TIGHTENING TORQUES - COOPER (1.6L) R50/W10
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| Scope of applicability of tightening torques, refer to EXCERPT FROM COMPANY STANDARD BMW GS 90003-2 Surface colour / | (surface coating) | |||
| M12 thread | yellow (ZN) | M12 8.8 | 82 Nm | |
| silver (ZNS) | M12 8.8 | 66 Nm | ||
| yellow (ZN) | M12 10.9 | 115 Nm | ||
| silver (ZNS) | M12 10.9 | 98 Nm | ||
| yellow (ZN) | M12 12.9 | 140 Nm | ||
| silver (ZNS) | M12 12.9 | 108 Nm | ||
| M12x1.5 thread | yellow (ZN) | M12 x 1.5 8.8 | 87 Nm | |
| silver (ZNS) | M12 x 1.5 8.8 | 68 Nm | ||
| yellow (ZN) | M12 x 1.5 10.9 | 123 Nm | ||
| silver (ZNS) | M12 x 1.5 10.9 | 100 Nm | ||
| yellow (ZN) | M12 x 1.5 12.9 | 147 Nm | ||
| silver (ZNS) | M12 x 1.5 12.9 | 110 Nm |