Removal & Installation
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 MINI Cooper, 2007 MINI Cooper, 2006 MINI Cooper, 2005 MINI Cooper, and 2004 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
Disconnect battery negative lead. Release screws (1). Withdraw ignition starter switch. Disconnect plug connection (2) and remove ignition switch. See Fig 1 . During installation, check alignment of ignition starter switch to steering wheel lock. Check alignment of turn indicator lever to steering wheel. Secure screws with paint.