LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2013 >> Cooper Paceman, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1703 (COLLISION - BODY PANEL REPAIR (E65) Alpina) >> 00 Body Panel Repair General Information >> 41 00... Handling Airbags And Restraint Systems

41 00... Handling Airbags And Restraint Systems

WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.
  1. 1.0 Airbags and restraint systems 
    • On vehicles with airbags and restraint systems, observe the relevant safety instructions.
    • During straightening work on the body, you will be exposed to the risk of accidental airbag triggering when the battery is connected.

      Due to this potential hazard, it is essential to disconnect the battery negative lead prior to welding and straightening work. Prior to disconnecting the negative lead, interrogate the fault memories of the control units if necessary.