41 00... Gap dimensions, body

The dimensions specified in this service information are applicable at an object temperature of 20 °C. The aim of adjustment is to achieve a uniform gap.

Symmetry of the gaps between left and right sides of the vehicle has top priority.

For door gaps, the maximum deviation between the front and rear door gaps must be 1.0 mm.

No gap dimension are specified for components which cannot be adjusted.

Dimensions in mm: 

Fig 1: Body Gap Dimensions (1 Of 5)

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 2: Body Gap Dimensions (2 Of 5)

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 3: Body Gap Dimensions (3 Of 5)

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 4: Body Gap Dimensions (4 Of 5)

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 5: Body Gap Dimensions (5 Of 5)

Courtesy of BMW OF NORTH AMERICA, INC.