61 67 010 Removing and installing/replacing washer pump for headlight cleaning system

Before replacing the pump, check the washer fluid reservoir for dirt contamination and clean if necessary!

Necessary preliminary tasks:

NOTE: Catch any escaping washer fluid if necessary.

Unlock latch mechanism (1) and remove hose pipe from washer pump for headlight cleaning system (3).

Disconnect plug connection (2).

Turn washer pump for headlight cleaning system (3) clockwise and pull out of washer fluid reservoir for window washer system.

Installation note:

Replace strainer of washer pump for headlight cleaning system (3).

Coat sealing ring of washer pump for headlight cleaning system (3) with lubricant.

Ensure hose pipe is laid without kinks.

Fill washer fluid reservoir.

Fig 1: Removing Washer Pump Of Headlight Washer System

Courtesy of BMW OF NORTH AMERICA, INC.