65... Removing and installing central bass speaker on passenger's side

Necessary preliminary tasks:

Remove LEFT OR RIGHT FRONT SEAT
Remove combox holder or USB hub holder, if necessary. See REMOVING COMBOBOX or REMOVING USB HUB .

Release screws.

Remove trim (1) upwards.

If necessary, remove the breakdown set (2).

Fig 1: Locating Central Bass Speaker Trim Screws And Breakdown Set (Passenger Side)

Courtesy of BMW OF NORTH AMERICA, INC.

Cut open carpet (1) at the marked line (2).

Fig 2: Identifying Carpet And Marked Line

Courtesy of BMW OF NORTH AMERICA, INC.

Feed out the carpet (1) at the air duct (2).

Installation note:

The carpet (1) must be correctly laid at the area of the air duct (2).

Fig 3: Identifying Carpet And Air Duct

Courtesy of BMW OF NORTH AMERICA, INC.

Fold up the carpet (1) as shown.

Release screws at marked points.

Unfasten plug connection (2) and disconnect.

Feed out central bass speaker (3) upwards.

Fig 4: Identifying Central Bass Speaker, Plug Connection, Carpet And Screws

Courtesy of BMW OF NORTH AMERICA, INC.