41 00... Workshop Equipment
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.
Minimum workshop equipment requirements in order to ensure the correct and expert performance of body repairs:
The tools listed below must be used .
WORKSHOP EQUIPMENT REFERENCE CHART
| Steel | Aluminium | |||
|---|---|---|---|---|
| Tool | Structure | Outer skin | Structure | Outer skin |
| Bodywork tool assortment | x | x | ||
| Aluminium bodywork tool assortment | x | x | ||
| Bodywork saw | x | x | ||
| Single-handed grinder | x | x | x | x |
| Welding spot remover | x | x | ||
| MAG welding apparatus | x | x | ||
| MIG welding apparatus | x (E52 only) | |||
| Spot welding apparatus | x | x | ||
| Gas welder | x | |||
| Straightening system | x | x | ||
| Stud welding apparatus | x | |||
| Flame coating set | x | |||
| Universal riveting tool | x | |||
IMPORTANT:
In vehicles from model year 2001, higher-tensile and high-tensile steels are used in certain areas.
It is essential to check whether the spot-welding apparatus used conforms to the technical requirements of the currently recommended welding sets. Should you have any questions, please contact the country-specific Hotline.
The use of technically obsolete equipment may have serious consequences for the structure of the vehicle (e.g. in the event of a crash). In the end, this can result in safety and product liability risks which cannot be calculated.
It is essential to check whether the spot-welding apparatus used conforms to the technical requirements of the currently recommended welding sets. Should you have any questions, please contact the country-specific Hotline.
The use of technically obsolete equipment may have serious consequences for the structure of the vehicle (e.g. in the event of a crash). In the end, this can result in safety and product liability risks which cannot be calculated.
Use and restrictions:
Definition of Recommendation:
All currently recommended spot welding sets comply with the requirements relating to reliable welding of today's and future BMW Group vehicles. A spot welding unit will lose its recommendation as soon as tests with materials and material combinations designated for future use in BMW Group vehicles return negative results (see Table Group 1). All previous application before the withdrawal of the recommendation shall remain unaffected.
DEFINITION OF RECOMMENDATION
| Device designation | Manufacturer | |
|---|---|---|
| Group 1 Devices currently no longer recommended | CR500 | Car-O-Liner |
| Spot9000 | Tecna | |
| ATL 400V | Wielnder&Schill | |
| Group 2 Devices currently recommended (March 2007) | MIDIspot QSVM9000 | Celette |
| MIDIspot QSVM9000 | Elmatech | |
| CR600 | Car-O-Liner | |
| Multispot MI-100 Control | Elektron |
Application options and restrictions of above devices.
APPLICATION OPTIONS AND RESTRICTIONS OF ABOVE DEVICES
| Vehicle | Group 1 | Group 2 |
|---|---|---|
| E93 | x Except A-pillar, B-pillar, sill | x |
| E70 | x Except B-pillar | x |
| E64 | x Except A-pillar, B-pillar, sill | x |
NOTE:
(March 2007)
All models not listed can be repaired using the Group 1 and Group 2 devices.
All models not listed can be repaired using the Group 1 and Group 2 devices.