41 00... Information On Hazards
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.
1.0 Aluminum
HAZARDS REFERENCE CHART
| Hazards / effects |
Measures / regulations |
Repair stage 1:
(replacement of bolted parts, dent removal)
Repair stage 2:
(structural repairs with bonding and riveting) |
- When a vehicle outer shell is ground, aluminum dust accumulates in small amounts. This dust can be removed with conventional extractor systems.
|
Repair stage 3:
(structural repairs with welding)
- Explosion hazard due to high concentration of fine aluminum dust.
Arising e.g. during straight-through grinding of coated parts in the base material and large-surface grinding of bright-finish parts.
- Explosion hazard due to swirling up of fine aluminum dust in cavities.
Created by the necessary, thorough cleaning of machining surfaces and tools before and after machining aluminum.
|
- Avoid high concentration of fine aluminum dust by means of continuous extraction.
- Use explosion-proof extractor systems.
- Do not use compressed air when cleaning the work bay.
- Avoid swirling up dust when cleaning the work area.
|
|
|
- Do not operate ignition and fire sources in the intake area of extractor systems.
|