00 2 300 Assembly Stand With Universal Flange

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 MINI Cooper, 2007 MINI Cooper, 2006 MINI Cooper, 2005 MINI Cooper, and 2004 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Note: For accommodating engines from S85.

Engine: M10, M20, M20B25, M20B27, M21, M30, M30B34, M30Tur, M40, M41, M42, M43, M43TU, M44, M47, M47T2, M47TU, M50, M51, M52, M52TU, M54, M56, M57, M57D25, M57D30, M57T2, M57TU, M60, M62, M62VAN, M67, M67TU, M70, M73, M88, N40, N42, N45, N46, N52, N62, N62TU, N73, S14, S38, S50B30, S50B32, S50US, S52US, S54, S62, S85, W10, W11, W17.

SI number: 01 25 04 (155).

Order number: 00 2 300.

Assembly stand with universal flange.

Fig 1: Identifying Assembly Stand With Universal Flange

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

1 = 00 2 301 Assembly stand.

2 = 00 2 302 Universal flange.

3 = 00 2 303 Crank.

4 = 00 2 304 Protection hood.

5 = 00 2 305 Storage for small parts.

6 = 00 2 306 Moulded tray, rear.

7 = 00 2 307 Oil drip tray.

8 = 00 2 308 Moulded tray, front.

9 = 00 2 309 Wheel, front (without stop).

10 = 00 2 311 Wheel, rear (with stop).

11 = 00 2 312 Set of rippled mats.