31 35 000 Removing and installing/replacing front stabilizer

Necessary preliminary tasks: 

• Lower front axle support. See LOWERING/RAISING FRONT AXLE SUPPORT (SWZ00-2040)  or LOWERING/RAISING FRONT AXLE SUPPORT (UNIVERSAL LIFTER) .

Release nut (1); if necessary, grip dihedron (2) or hexagon socket.

Tightening torque 31 35 1AZ

Installation note: 

Replace self-locking nut.

Release left and right screws (1).

Tightening torque 31 35 3AZ .

Remove anti-roll bar (2) from control arm holder.

Installation note: 

Replace RUBBER MOUNT  for anti-roll bar.