41 00... Use Of Materials In Outer Skin
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, 2012 BMW 760Li, and 2011 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
The following illustration is a schematic diagram of all the body variants.
Apply this illustration to the relevant vehicle.
All components not listed in the table below are composed of established sheet steel qualities.
| Component | Vehicle | Material |
|---|---|---|
| (1) Side wall, front | F01, F02, F04, F10, F11 | Aluminium |
| F12, F13, F06 | Plastic (thermoplastic) | |
| (2) Front door | F01, F02, F04, F06, F07, F10, F11, F12, F13 | Aluminium |
| (3) Rear door | F01, F02, F04, F06, F07, F10, F11 | Aluminium |
| (5) Engine compartment lid | F01, F02, F04, F06, F07, F10, F11, F12, F13 | Aluminium |
| (6) Hardtop/roof | F01, F02, F04 | Aluminium |
| (7) Soft top compartment lid | F12 | Plastic (thermoplastic) |
| (8) Tailgate | F07 | Aluminium |
| F06, F12, F13, | Plastic (thermoplastic) |