LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2013 >> Cooper JCW Countryman, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 3734 (COLLISION - BODY PANEL REPAIR (F02) 760Li) >> Body Panel Repair General Information >> 41 00... Soldering Steel Components >> Notes on melting/tinning

Notes on melting/tinning

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, 2012 BMW 760Li, and 2011 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

Only applicable within the European Union!

European used-car regulations prohibit the use of tin containing lead in motor vehicles introduced after 01.07.2003!

Even out unevenness smaller than 2 mm with filler according to painting handbook

If an exceptional unevenness is larger than 2 mm, use METAL FILLER .

Only perform in visible areas of the outer skin and on the carrier support.

All areas which have covers on the vehicle are not to be processed.